Matsuricon Commission Progress

Yes, I missed the usual WIP Wednesday by a couple of days but whatever. Here's the stuff I've been working on! It's all commissions since I already have all of my own projects done for Matsuri.

First up is a new Raven Branwen mask. I had to repattern it since I didn't keep the old pattern from the first one i made. This is for a friend who will be cosplaying Raven alongside the Yang for whom I recently finished the gauntlets.

The pattern may be new, but the method isn't; I'm making it the same way I madee the first one, with craft foam and cardstock as the base and worbla over top. 

The mask is fully constructed at this point, including the raised sections for the red markings, which you can see drafted above. Now it's getting a bunch of mod podge and I'll start the painting this weekend!

Next up is the companion weapon to the sword I recently finished (you can see it in this blog post), the Blue Rose. It's the gun Nero weilds alongside his sword, the Red Queen.

Originally I wasn't planning on having this done until Youmacon but things worked out such that I currently have time. 

This is as far as I've gotten on the construction but it's coming together pretty nicely. The handle is wood, all cut and dremeled by hand. The cylinder is a section of heavy duty mailing tube that I cut and used the dremel again to make the grooves and the vinet design. The hammer & trigger are both MDF since they needed to be thinner than the rest of the frame. The only other bits that aren't in the photo are the barrels, which are made out of PVC. I still need to do a lot of fine sanding on everything and of course there are sections that aren't even there yet but things are moving along. The engraved details are going to take a long time and there are a lot of them! But it should be really pretty when it's done.

And that's all for now!

More Commissions, More WIPs

Hey everyone! I've been in and out of town a lot with all of my summer trips happening within a couple weeks of each other so I've not been as productive as I would be otherwise. That and I've been playing Horizon Zero Dawn so that doesn't exactly help my productivity XD

Anyway, I wanted to show you all what I've been working on lately!

First up is the only project I've actually finished: Yang's Ember Celica from RWBY. I've made quite a few RWBY weapons at this point, both for myself and others, so I'm excited to get a shot to make yet another one!

These gauntlets are made almost entirely out of EVA & craft foam of a variety of thicknesses.

But of course it wouldn't be a Mikey prop if there weren't some weird pieces of trash incorporated somehow, right? So in this particular instance I used a small cardboard tube that I acquired god only knows where and sawed it in half to get the gun barrels, and I also used four plastic spools sliced down the middle to get the shells for Yang's ammo. Thankfully I've picked up a bunch of random spools of thread at thrift stores and garage sales over the years so I have them in abundance. However, a word of advice to anyone thinking of doing the same thing: remove all the thread first. I was lazy and tried to saw straight through the first one with the thread still on there and it made a tangled mess.

We've skipped a few steps here, but the pieces are all assembled and the plates on the back have a layer of worbla on them. Everything was coated with mod podge a few times and then I sprayed it all yellow! Yellow doesn't cover very well so I sprayed it to avoid having to paint 437 coats to get the color even.

Details are all painted by hand and I did a bit of subtle shading between the plates on the back and on the red shells.

And here's everything finished and assembled! The cuffs have velcro on the one end and are permanently adhered on the other so they're nice and stable, but are easier to put on & take off.

---

Next up is Nero's sword from Devil May Cry: The Red Queen. I'm working on this for my friend Heckin Sleepy Cosplay. He's already put together a lot of the other pieces for the cosplay and has been posting photos on his instagram so you should definitely go check it out cause everything looks awesome so far!

I will be making the gun as well, but not until aster Matsuri.
The blade for the sword is MDF, and the handle actually came from an old rake that broke a while back. 

You can see the model in this photo too. It bleongs to Heckin Sleepy, but it's made of metal so it's super heavy and he wouldn't be able to carry it around at a con. I did some extra shaping with my dremel, as well as digging out the channel that run along the edge of the blade. The other details are all made out of a smattering of other things including craft foam, puff paint, masking tape, and worbla. The most interesting piece is the largest part at the start of the hilt. It's a weird plastic thing I found in my stash of stuff that I believe came from one of those giant rolls of paper. It ended up being a good size and the hole in the center fit snugly around the wooden handle so I went with it! Also, the goofy handbrake thing is a paper straw with worbla around it. 

Those three round, silver things on the blade are actually magnets (the super strong ones you can get at the hardware store) so that hopefully it'll just snap right onto his back to magnets incorporated into the coat. 

With everything assembled, it was time to start painting! I sealed the entire thing with a few coats of mod podge, then primed it with black paint. The next layer was the silver spray paint, and then I started adding the red details by hand.

And last up is all of the progress I've made so far! It looks done, doesn't it! But I haven't done any of the red details on the other side yet and the whole thing needs mod podge slathered over it so I have about another day or two before it's totally finished.

---

Last up is a Skyrim shield I'm making for my cousin's kid. Apparently he loves play sword fighting with sticks so his dad decided he needed a legit shield to play with. I had to make the thing pretty heavy duty so it could take the beating without falling apart! As such it's all MDF & hardboard, with worbla for the emblem on the front.

I'm not following any particular design for this guy, my only request was to have the Skyrim symbol on it so there he is smack dab in the middle! I haven't started painting yet but I think I'm going to go with dark blue & silver for the front.

And that's all we have this week! I hope everyone's enjoying their summers and don't forget to put on sunscreen! this has been a friendly reminder from your neighborhood ghostly white ginger.

Colossal 2017

Hey everyone! I just got back from another awesome Colossalcon and my priority 1 is sharing my experience with all of you lovely people!
But of course I have minimal photos of my own cosplays because I'm a dummy and always forget to have people take photos of me on my own phone >_<

Nevertheless, here's how the weekend went!

Thursday I didn't even end up going, as I was still finishing up Jordan's Ruby cosplay (primarily painting the scythe), but I'm pretty sure if I had gone on Thursday I'd be even more exhausted. On the bright side, I got everything done pretty early and got to spend a relaxing evening with my husband and puppy.

I believe this is the third time I've gotten him to cosplay with me so we were both very excited.

Friday was a pretty easy day, I spent the day in Hestu and did lots of expand-a-banding people's inventory when they would ask for my photo. Went to a Voltron panel. Hung out with my friends. It was a good day.
I was also involved in a late-night RWBY panel as Yatsuhashi (in pajamas), which was interesting. I was tired and minimally involved since Yatsu is such an minor character so it was a struggle to stay awake but I made it through, and safely got back to my firend's house, which whom I was staying.

In anticipation of the panel, I made a basket full of Grimm. RAWR!

Saturday was a bit rough since I only slept for a couple hours, but I still had a lovely time with Jordan as our genderbent Ruby & Penny. We got lots of compliments and went to the RWBY shoot (after wandering around the waterpark for a good long while trying to find it).  Unfortunately, I'm an idiot and never made anyone I actually know take photos of the two of us, so hopefully I'll be able to find some one the internet and I'll share.

Also did a short stint in Hestu on Saturday for the Zelda shoot which was tons of fun and there were so many amazing cosplayers there. The BOTW game was strong. And I got to shoot my favorite thing from the whole weekend, which is pretty much the whole reason I wanted to make Hestu in the first place!

After the RWBY shoot Jordan & I went out to lunch with some friends and when I came back I put on Guy for a little bit, hoping to find the Rebecca cosplayer I'd seen as we were leaving. Fortunately, I found her almost immediately!

Sunday was pretty easy, hung around a while to say goodbye to friends, dressed in my magizoologist outfit since I brought it so I figured I might as well wear it at least once. Then came home to cuddle with my favorite boys.

All in all, it was exhausting but I had a lot of fun. With any luck, people will be posting photos over the next week or so, so I'll try and keep an eye out for things. And maybe someday I'll remember to get photos of my own cosplays on my own devices XD
If you want to see photos of all the other awesome cosplay I saw there, check you my facebook album HERE!