Contact Us

Questions? Comments? Concerns? Suggestions? Submissions? Shout-outs?

Whatever you want to tell us here at Mikey Does Cosplay, we're always happy to hear your thoughts and feedback!

         

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

reflection.jpg

Blog

Here's where the magic happens. I'll be posting about all of my experiences and experiments (both failed and successful ones), introducing you to my costumes, sharing fun stories, linking tutorials and useful products, and who knows what else!

 

Care of Magical Creatures

Michael MacWolff

Welcome back, my darlings! If you remember my parting words from last time, I promised a magizoology lesson with all of the critters I've been making for my Harry Potter weekend this October, and I intend to honor that promise!

As a biologist by schooling, a nerd by nature, and a crafter by profession, it should come as no surprise to anyone that I would be entranced by the many wonderful creatures inhabiting the world of Harry Potter. I, like many of you, grew up with the books though my journey didn't quite align with Harry's Hogwarts years. I remember reading the first book in middle school, not too long after it was published. I vaguely remember enjoying it, but I wasn't much of a reader as a kid (and frankly, I'm still not much of a reader, as it tends to put me to sleep so it takes a very long time to successfully finish them). I did, however, enjoy the first couple of movies quite a bit, and by the time Harry Potter and the Goblet of Fire was coming out in theaters inn 2005, I had resolved to finish the books before seeing their film adaptations. From book 4 on, I was thoroughly invested in the series, along with a good deal of my friends (who make up the vast majority of attendees for my October event). We even had an awesome Harry Potter dinner at my college which I attended with them, and the school put on quite an awe-inspiring production. They had a woman in a pink dress with a frame around her accepting invitations at the entrance, there was a full cast of professors (all in spot-on costumes) for the head table, and the dining hall, while already having some of the ambiance of an old castle, was decorated with house banners and all matter of wizarding accouterments. Anyway, this is all a roundabout way of saying that the world of Harry Potter is one that's very close to my heart, and that the more recent introduction of Fantastic Beasts and Where to Find Them was a welcome addition to the canon, particularly given my fascination for unusual animals. There is no doubt this loyal Hufflepuff would have followed in Newt Scamander (as well as Rubeus Hagrid's) footsteps and been an advocate for the many fascinating magical creatures of the world.

Bu that's enough about me and my journey, let's get on with it, shall we? Let me introduce you to a few of my friends!

Here's a photo from Kent Potterfest of my magizoologist outfit and collection of creatures. I have enough at this point that I can't physically carry all of them at the same time XD

Here's a photo from Kent Potterfest of my magizoologist outfit and collection of creatures. I have enough at this point that I can't physically carry all of them at the same time XD

Bowtruckle

One of the fan favorites from the film Fantastic Beasts and Where to Find Them, the bowtruckle was one of the first magical creatures I figured out how to produce, and one of the ones I can make expeditiously enough to sell.

One of the fan favorites from the film Fantastic Beasts and Where to Find Them, the bowtruckle was one of the first magical creatures I figured out how to produce, and one of the ones I can make expeditiously enough to sell.

Bowtruckles are small creatures which inhabit trees of wand-quality wood. They are very well camouflaged and difficult to spot while hiding in their trees. Despite being rather shy, they are quite protective of their home trees and will use their long, sharp fingers to attempt to gouge the eyes of anyone who attempts to damage their tree. For a wizard to gather wand wood from a bowtruckle's tree, the best method is to bring an offering of wood lice, which will placate the bowtruckle long enough to harvest the wood.

Harry and his classmates studied bowtruckles with Professor Grubbly-Plank in their fifth year at Hogwarts, Harry receiving deep cuts on his fingers from squeezing his a little too hard.

As you can likely tell from their appearance, my bowtruckles are made primarily from chenille stems (pipe cleaners), with leaves from fake flowers,  some thin wire, and small black spherical beads for the eyes. I've made a whole family of them which live in a fake tree I found at the thrift store.


Niffler

The niffler arguably stole the show in Fantastic Beasts and Where to Find Them. He's cute, a mischievous, and is constantly getting himself into comical trouble.

The niffler arguably stole the show in Fantastic Beasts and Where to Find Them. He's cute, a mischievous, and is constantly getting himself into comical trouble.

Nifflers are long-snouted, burrowing creatures with a great fondness for anything shiny. Goblins often keep these creatures to burrow for buried treasure. They are gentle creatures but can do a serious amount of damage to belongings and as such it is inadvisable to keep them as pets.

Harry and his classmates studied nifflers in their fourth year at Hogwarts under Professor Hagrid. Hagrid buried a bunch of leprechaun gold and the students had their nifflers hunt for it.

My niffler was crafted from a black dog stuffed animal, which I pulled apart and used an approximation of this pattern to create his body, hand-stitching the pouch to his belly. I made his hands and feet out of tan chenille stems and stitched them onto his arms and legs. His face is Sculpey clay, which I then painted, sealed, and attached with an abundance of hot glue. His nest is a weird string-egg thing I found t the thrift store and painted gold. My steadily growing collection of weird old jewelry I've picked up at thrift stores and garage sales over the years finally got some use as well, for his stash of shiny things!


Occamy

Occamys are feathery, winged serpents native to India and the Far East. These carnivorous creatures are known to eat anything from rats to monkeys, but some seem to have a particular fondness for insects. These creatures can swell or shrink in size to suit the container they occupy and as such can be quite problematic when in open spaces. They are also rather aggressive creatures,  being particularly defensive of their silver eggs.

My occamys have appeared in two different incarnations, the first, pictured above in the teapot, was made from worbla scraps that I heated, squished together, and sculpted into the serpentine creature. The wings are small metal charms which I glued onto the creature and painted. This version is not posable.

The second, and much larger Occamy I created is a plush version. I made the pattern myself (which took a lot of trial and error... mostly error), and eventually got something I was satisfied with. The beak is gold felt, the body is two different blue cotton prints (a darker, mottled blue with gold flecks for the top, and a lighter, crackle-textured print for the bottom), and the wings are two different tones of purple fleece. I made the eyes with small epoxy dome stickers over an eye pattern that I drew myself using colored markers. They are fully posable with heavy-gauge wire running the length of the serpentine body and through the wings.

I just have the one plush one at the moment, but now that I have a decent pattern, I plan to make more for sale!


Fwooper

Fwoopers are small, brightly-colored songbirds that come in a variety of vibrant hues. These birds' quills are widely used for fancy quills and they are prized pets, however its song will eventually drive its listeners mad, and as such are required to have a silencing charm on them.

I'm currently in possession of two fwoopers, one of which I created myself, and the other of which purchased at Oddmall from Turkey-Eyes Designs (the green one pictured here). I liked the way they made his little face and eyebrow feathers so much that I modeled my own after it. For mine (the pink one pictured above), I started with a small styrofoam egg, flipped upside-down (so the slightly larger part is facing up). I used feathers harvested from a two-toned pink feather boa and hot glues them onto the egg. The face is made from Sculpey clay and glued on as well. For the feet, I used medium-gauge wire to make the general shape, and then wrapped thin-gauge wire around to make it look more like a bird's foot. The perch I actually made myself as well, using a wooden plaque found at the thrift store for the base, a wooden dowel rod for the vertical peg, and a piece of a thick branch that fell out of a tree in my back yard.


Ashwinder

The ashwinder is created when a magical fire (that is to say, a fire which has had some sort of magical substance added to it) is left unattended for too long. These serpents only have a lifespan of an hour, however in that time they will slither out of the fire which spawned them and find a secluded place in which to lay their eggs. These eggs are incredibly hot and can cause fire to ignite within just a few minutes of being laid. They are, however, quite valuable if frozen and used in potions.

My ashwinder started out as an unusual ash tray souvenir thing from Las Vegas, which I found at a thrift store. Its some sort of ceramic, so I carved out the center section with my dremel. I painted it, and used small plastic easter eggs for its brood. there are mood lights in them which make them glow.


Knarl

The knarl is one of the hardest magical creatures to recognize, as it is visually indistinguishable from the common hedgehog. The only way to tell the two apart is to offer them food. A hedgehog will accept and enjoy the gift, the knarl, however, will be offended at the gift, assuming the intention was to lure it into a trap, and will consequently wreak havoc trough the garden.

The knarl is one of the few creatures I did not really do anything special with, it's just a stuffed hedgehog I found at the thrift store.


Golden Snidget

Those of you familiar with the popular wizarding sport of quidditch may find the name and appearance of the golden snidget to resemble one of the balls used in the game. This is not coincidence as in the early days of quidditch, this small, golden bird was used for the same role as its modern counterpart. Snidgets are small, lightweight, and very adept fliers, due to their completely rotational wings which allow them a great deal of control in the air. They can hover in place, fly backwards, forwards, or any other direction, and can change direction mid-flight in a fraction of a second.
As noted earlier, they were used in the game of quidditch in its early days, but as these birds are very fragile, they would often be crushed when caught by a seeker. These small, delicate birds became more and more rare, and finally wizards developed a contraption to serve their purpose. It is now illegal to capture snitches, due to their protected status.

To create my snidget, I crocheted his round body using gold eyelash yarn and worsted-weight yarn at the same time, to give it the fizzy texture, but also have it be substantial enough to look solid. I used a pretty simple crochet pattern for a ball, and then stuffed it. The wings are just a collection of gold feathers glued together with a wire on the end to keep them firmly attached to his body. The eyes are small, half-round doll eyes that I found at the craft store. The beak is sculpey clay, and is also held in place by a wire. The little feet are made from orange chenille stems.


I have a good deal more critters to share with all of you, but I think 7 is enough for now.
f you enjoyed today's post, stay tuned for a second Care of Magical Creatures lesson next week!

Another WIP Wednesday

Michael MacWolff

Hey everyone, short post today, but I've finished another commission and I wanted to show you the results! I've been doing a lot of Overwatch stuff lately (surprise, surprise) and I finished the armor pieces for Imp Mercy.

I'm still working on Symmetra's Photon Projector, but my customer's deadline got pushed back so I haven't made much more progress on that than the last time you've seen it.

I do, however, also have a new project lined up to make Hayseed Junkrat's mask. It'll be nice and creepy but should also turn out pretty cool.

I've only just put the pattern together so I haven't made any real progress yet, but stay tuned and you'll see it come together! 

For those of you magically inclined, I'll also have a treat next week, as I'm attending the Ket Potterfest this weekend in my magizoologist outfit. I'll be taking a bunch of my magical creatures so you can expect a bunch of photos, and an introduction to the critters I've been working on. Until then, ta!

WIP Wednesday Strikes Again

Michael MacWolff

Welcome back, folks. Apologies for failing in my attempt at posting weekly for any considerable amount of time. But here we are again, amidst a bunch of projects, new and old.

First things first, let's take a look at the finished product for those Rengar weapons I posted about at the end of last month, since they're finished and in the hands of their new owners!

I'm super happy with how they turned out, as it the person who ordered them (score)!

Now I'm in the middle of that mercy armor! I've pretty much got everything put together and am working on the finishing stages for both the grieves (leg armor) and tassets (hip armor). The leg armor is worbla over craft foam, in my usual manner. Each grieve 4 separate panels fused together (well techically 6 if you include the little knee spike bits).

For the tassets, I wanted them to be a little lighter weight, so that they weren't unweildy with the costume, so there's no worbla layer, they're all foam instead. I used 1/4" EVA foam tiles for the base, and craft foam layers to make the top details. It was specifically requested that the little pink panels light up, so I also had to add lighting.

you can see all 3 layers of foam here.

you can see all 3 layers of foam here.

To get the clear lines for the partitioned sections, I simply sliced along those lines with an exacto knife, then ran over them a few times with my heat gun to make them more obvious. I learned that from this lovely tutorial.

The thin hole along the top is where the lighted panel goes, and the hole is through all 3 layers of foam. The thick EVA foam houses the strip of lights, which I used a string of Moon Lights for. To fit them into the space, and to even out the light as much as possible, I made a little bar roughly the width of the opening by taking the wire, flattening out a section roughly the length I needed, then doubling the wire back on itself, et. cetera, until I had a little wand that glowed the whole way across. I stuck that in the hole and held it there with clear packing tape, then glued a piece of foam with some aluminum foil on it (to reflect the light forward) to the back of the panel, with the switch & battery pack hanging down from it, so that you wouldn't have to remove the panel to switch the lights on (you can't remove the panel any more period, without destroying the armor). There were two additional layers to get the lights glowing to my satisfaction: first, on top of the EVA foam, but under the first layer of craft foam, I placed a doubled section of white plastic grocery bag. The reason for this was to help diffuse the light so the panel glowed more evenly, rather than looking spotty with the individual lights on the string. Then, in between the top & middle layers of foam, I used a piece of translucent pink plastic that came from a plastic file folder. That gave the light it's proper hue, and gave it a nice solid color for when the lights were off.

You can see the pink plastic folder here.

You can see the pink plastic folder here.

And here's a better shot of the glow.

And here's a better shot of the glow.

The last details to be added were the little diamond-shaped prisms along the sides. I made a half-prism out of cardstock & made a silicone mold out of it, so I could have 4 identical shapes. I cast them in liquid plastic, and attached them using contact cement. All that's left is a few layers of Mod Podge and then I can start painting!

The last thing I've been working on is expanding my menagerie of magical creatures! There's a big Harry Potter festival in Kent next weekend and I intend to go in my Magizoologist attire, with as many fantastic beasts as I can assemble between now and then! My most recent creations are a niffler and a demiguise.

And that's all for this week!I'll be sure to take some photos at Potterfest to share with you all!